Find support at aa meetings corpus cristi
f0647bde

14:13. The highway of a hydraulic actuator - check and replacement

1. Check a condition of hoses and tubes each 6 months, at detection of cracks, dribbles, loss sty and other damages replace a hose or a tube.
2. Select new tubes for outer diameter It is forbidden to establish copper tubes.
3. Length of a new tube has to be selected with a stock in 10 mm (taking into account bends) for flaring under the union.
Flaring and bending of tubes is recommended to be carried out in car service.

13.3 The union for pumping on pressure regulator


4. Establish a new tube at distance not less than 19 mm from moving details.