14:16. The vacuum amplifier of brakes - removal and installation
1. Remove the main cylinder.
2. Disconnect a hose.
3. Disconnect a rod of the amplifier from a brake pedal, having removed an axis (photo).
4. Turn off 4 nuts and get the amplifier from a motor compartment.
5. Installation is carried out upside-down. Before installation of the cylinder check the sizes A and B (photo), if necessary adjust. If at adjustment the size A changed more than on 0,5 mm, then the amplifier replace because of his wear-out.
|
15.5 Before installation of the cylinder check the sizes A and B (photo), if necessary adjust (on a part of cars, - see Specifications)
|
6. Pump over brakes.
7. Check height and a free wheeling of a pedal (Hl. 1)