6.8. The pump of cooling liquid - removal and installation

1. Disconnect the battery from weight and lift the car.
2. Merge cooling liquid.
3. Remove the fan with a casing and belts of hinged units.
4. On V6 engines: remove a pulley of the pump and a pulley - an uspokoitel from the crankshaft, uncover a gear belt.
5. Turn off bolts of fastening of the pump (photo).
6. Remove the pump, remove old consolidation.

7.3 Check of a side play of a shaft of the pump

8.5b Bolts of fastening of the pump on V6 engines

8.7 Details of the pump of cooling liquid of the V6 engine
1. For zedneprivodny cars                                                      
2. Laying                                                                                 
3. For all-wheel drive cars

7. At assembly grease laying germetiky and establish on faded cylinders (photo).
8. Tighten bolts evenly with the set moment.
9. Other operations are carried out in the return about. Adjust a tension of belts, wash down liquid, warm up дригагель and be convinced of lack of a leak. If necessary add liquid.