f0647bde

8.5. Distributor installation

If after removal of the distributor position of the crankshaft was not broken
1. Turn the runner in the situation designated before removal of the distributor.
2. Install the distributor, having slightly turned I run NOC that the flute on the distributor entered gearing with the drive roller
3. If position of the case of the distributor concerning the block did not change, and fixing openings coincided. that the put tags on the runner and on the case of the distributor have to settle down opposite to each other.
4. Tighten fastening bolts with the set moment.
5. Put a cover and attach wires.
6. Check installation of ignition.
If after removal of the distributor position of the crankshaft was broken
7. Expose the piston 1 го the cylinder in the provision of VMT of a step of compression.
8. Install a cover on the distributor. Define the place where a conclusion of a wire of the 1st cylinder of settles down designate a tag on the distributor case.
9. Uncover, turn the runner, having arranged it opposite to a tag.
10. Put a cover and attach wires
11. Check installation of ignition.