13:12. The transfer case - removal and installation
1. Disconnect the battery from weight.
2. Lift a front of the car and establish on supports.
3. Remove guards of a box and merge oil from a box.
4. Designate provisions of driveshafts concerning flanges of the transfer case, turn off bolts disconnect both driveshafts.
5. Disconnect wires from the sensor of inclusion of the forward bridge and a cable of a speedometer (photo).
6. Remove torsions (Hl. 11).
11.9 Bolts of fastening of the transfer case differ by the sizes (3 lower shown in a bolt picture more long than the others) therefore before an otvorachivaniye designate their arrangement.
|
7. Prop up transmission a support and remove a stretcher.
8. Turn off a nut of fastening of a rod of the transfer case to a control lever (photo) and remove a rod from a hairpin.
9. Establish a support under a case of the transfer case. Turn off bolts of fastening of a box (photo), displace a box back and carefully lower on a floor.
10. Assembly is carried out upside-down. Grease the demountable planes of cases of the transfer case and transmission with structure with number according to the Nissan KP610-00250 catalog, or equivalent. At installation of driveshafts combine the tags put when dismantling.