7.6. A pedal - removal and installation
1. Disconnect a cable from a pedal (see above).
2. Turn off bolts of an arm and remove a pedal.
3. Installation is carried out upside-down. Adjust the switch of a low gear (Hl. 7).
- 1. Maintenance instruction and to maintenance
- 2. Maintenance of the car
- 3. Четырехцилиндровыв engines
- 4. VS engines
- 5. All engines
- 6. Cooling systems, heating, ventilation and conditioning
- 7. Fuel and exhaust systems
- 7.1. Fuel system - general information
- 7.2. The fuel filter - replacement
- 7.3. Idling turns - check and adjustment
- 7.4. The fuel highway - repair
- 7.5. A cable of the drive of a butterfly valve - removal and installation
- 7.6. A pedal - removal and installation
- 7.7. The fuel pump - check
- 7.8. The fuel pump - removal and installation
- 7.9. System of electronic injection of fuel - general information
- 7.10. Units of control and measuring system with the processor ECCS block - general information
- 7.11. Decompression of fuel system
- 7.12. The case of a butterfly valve (for systems with preliminary injection of TBI of systems) removal and installation
- 7.13. Nozzle replacement
- 7.14. System of injection of fuel – adjustment System of preliminary injection (TBI)
- 7.15. Fuel system cleaning
- 7.16. Tank removal and installation
- 7.17. Fuel level sensor removal and installation
- 7.18. Tank washing
- 7.19. Exhaust system general information
- 7.20. Forward exhaust pipe removal and installation
- 7.21. Catalytic neytralizatorsnyaty and installation
- 7.22. Muffler removal and installation
- 7.23. Average pipe removal and installation
- 8. System of electric equipment of the engine
- 9. System of decrease in toxicity of exhaust gases
- 10. Mechanical transmission
- 11. Automatic transmissions
- 12. Coupling driveshaft and back bridge
- 13. A running gear of cars with a wheel formula 4x4
- 14. Brake system
- 15. Suspension brackets and steering
- 16. Body and elements of finishing
- 17. System of electric equipment
Паспортизация отходов еще здесь.