f0647bde

4.8. A final collector - removal and installation

1. Disconnect the battery from weight, remove the air filter.
2. Lift the car and establish on supports.
3. Disconnect a forward exhaust pipe from a collector.
Removal of the right collector
4. Remove thermal guards (photo).
5. Turn off nuts of a collector (photo).
6. Raise a back part of a collector and remove a collector.
Left collector
7. Turn off bolts of a thermal guard (photo).
8. Disconnect a recirculation tube.
9. Working from below, turn off three nuts from above and from below and disconnect an exhaust pipe (a photo 8.5).
10. Get a collector from a motor compartment.
Installation
11. Clear a collector of the consolidation remains.

8.5 Sequence of an otpuskaniye of nuts of final collectors
1. Right collector
2. Left collector 
3,4 Forward part


8.7 Details of the left final collector
1. Recirculation tube
2. Laying


12. Establish new laying on a head of cylinders. Tighten bolts and nuts in the specified sequence (photo).
13. Other operations are carried out upside-down.