4.19. A flywheel (a drive plate of the hydrotransformer) -
1. Remove transmission (Hl. 7).
2. On cars remove the coupling mechanism from the manual transmission (Hl. 8).
3. Put tags of orientation of a flywheel on the crankshaft (photo).
4. Turn off bolts of fastening of a flywheel (a drive plate of the hydrotransformer) to the crankshaft (photo).
|
19.3 Designation of an initial installation site of a flywheel (it is necessary not to break balancing
|
5. Remove a flywheel (a drive plate of the hydrotransformer)
6. Check a condition of a frictional surface of a flywheel. Polish minor defects. Check a deviation from the plane by caliber and probes.
7. Combine the tags put when dismantling and establish a flywheel.
8. Further operations are carried out upside-down.