4.18. A back epiploon - replacement

1. Remove transmission (Hl. 7).
2. Remove a flywheel or a drive plate of the hydrotransformer.
3. Hook and carefully get an epiploon (photo).
4. Grease a new epiploon with molybdenic lubricant.
5. Dress an epiploon on the crankshaft and carefully press blows of the hammer with soft brisk.
6. When the surface of an epiploon becomes aflush with the holder, carefully press an epiploon against the stop blows to a brass core (photo).
7. Other operations are carried out upside-down.

18.3 Extraction of a back epiploon

18.6 Final press fitting of an epiploon