15.7. Bars and extensions of a suspension bracket - removal and installation
1. Lift a car front. Remove a mud guard (if it is provided).
2. Turn off a bar nut (or extensions) and remove a washer and plugs (photo).
3. Turn off nuts of bolts of fastening of a bar to the lower lever (photo),
4. You will remove a bar
5. If act both bar, then designate them to establish on former places.
|
6.6 The correct installation of details of fastening of a bar at assembly. Washers have to be turned by a concave part outside. 1. Plugs 2. Washers
|
6. Installation is carried out upside-down, track correctness of installation of details (photo). Finally tighten bolts and nuts after lowering of the car on wheels.